Mws eventide update

This can be used for program storage after the update. Timeliness With any upgrade there is always a small risk of problems. You will need a 9 pin serial cable to connect between your PC and your system. There are two types of such cables.

A straight-through connection with each pin on one end of the cable connected to the same pin on the other end. Use this one. A file transfer or crossover cable, designed for connecting two PCs together. Do NOT use this one.

Using your browser, download and run the Update Application — this will be an. EXE file. Use default settings unless you have a good reason to do otherwise. The upgrade will take between two and ten minutes. If you have trouble with this procedure, try again a few times. First you must create the upgrade card You will need the following: A Compact Flash CF card, often used by digital cameras.

This may have been supplied with your unit and are also widely available Eventide recommends Sandisk. The card needs about 4M bytes or more free space.

Using your browser, download the Update Card files and save them to disk. These will be in the form of a single ZIP file. Installing the Upgrade Card These instructions apply to cards created as above and also those purchased from Eventide. Power down the unit. Insert the Upgrade Card into the memory card slot on the front of the unit.

While holding down the Upgrade key, power on the unit. Remove the Upgrade Card. The programming process is complete. Eclipse Upgrade Problem Resolution We have found that in some cases, people who have been successful in upgrading their Eclipse to versions 2.

If the symptoms are different, there is probably a different cause. You were able to upgrade but when powered up the unit froze, showing confused characters on the display. Confirm Bootloader Version If you have one of the above symptoms, confirm the bootloader version.

You may want to reformat it in Eclipse, so that nothing is stored to it. If you have non-official SOK installed - remove it first. Please update your copy. If you can not use autoupdater, you may download update directly. New edition was added from the official spoiler. Also, we are ready to announce a new converter from Suitcase8 to MWS. Magic Workstation forum has been hacked". We officially warn you NOT to answer these e-mails. There haven't been any technical problems with our site, forum or registration key sending service.

You may ask more questions at our forum. If you sent important mail to us during this period - send it again. Also, hosting was changed and now all the problems will disappear, we hope.